1. Dual-inlet design allows airflow to enter from both sides of the impeller simultaneously. Compared to single-inlet impellers, this system draws more air in the same amount of time, significantly increasing ventilation volume.
2. With an impeller diameter of 200mm and a height of 180mm, it is compatible with a variety of common centrifugal fan equipment, facilitating upgrades and retrofits of various ventilation systems or installation of new equipment.
3. Equipped with a high-efficiency SGCC motor, it improves the efficiency of the entire fan system, ensuring ventilation effectiveness while reducing energy consumption, meeting current energy conservation and environmental protection requirements and saving users operating costs.
4. It can be used for ventilation in factory workshops or air conditioning systems in commercial spaces. Its high efficiency, durability, and adaptability provide strong support for the stable and efficient operation of ventilation systems.
| Item | Specification |
| Product Name | High Efficient SGCC Impeller for Motor Fan (7/7) |
| Size | φ200mm, height 180mm |
| Housing Material | Galvanized Steel Sheet |
| Fan Type | Dual Inlets |
| Central Shaft Hole Size | 1/2 inch or 0.6 inch |
| Shaft Sleeve Material | Carbon Steel |
Products provided by famous enterprises are deeply trusted by users.
A 100mm axial fan inside a 2U analyzer chassis moves plenty of air until a 25mm pleated filter is fitted in front of it. Airflow collapses, the power board hotspot climbs, and thermal validation stalls. That is the moment engineers start looking at a 75mm centrifugal fan: a blower with a palm-sized impeller that trade...
READ MOREA 900 CFM variable air volume terminal box lands on your desk with one line at the bottom of the schedule: fan supplied by others. That line is where project weeks quietly disappear, because somebody still has to decide what moves the air and how much pressure it has to overcome. Short answer first: HVAC stands for he...
READ MOREA submittal sheet for a small air-handling unit usually carries one line that decides the whole project: 2,000 m³/h at 200 Pa, 220 V single phase, 62 dB(A) at 1.5 m. Buyers often skim past it and concentrate on cooling capacity instead. That is the wrong order. The short version: an HVAC system moves heat, and it move...
READ MORE
English
Español
ENG